TransTRBO Support Forum

Hi Guys, The drawing I posted with a USB connector and audio in and out is a bit of a trap. The usb is for programming and while Motorola sees it as a USB port the same as the front mic connector, you will probably get conflict when you try to use USB audio from the rear and front at the same time. ...

Hi Guys, I have no experience with anything other than Hytera. Even that experience is not recent, certainly not since the Motorola lawsuit against them. They were probably the closest to Motorola and yet they didn't use the same protocol for GPS and messaging. They certainly had a full API package ...

Hi Bryan, You can use the Speaker+ and Speaker- for audio out of the radio. Just ground the Speaker- and use the Speaker+. Tx Audio (Pin 11) is your Mic into the radio. You can use a USB microphone / headset but you will have to wire them to the Speaker Out of your PC and the Speaker+ of the radio t...

Hi Giorgio. The short answer is, I don't know. There are a lot of settings under Network / Services on the ARS and perhaps you can find something that matches with what Hytera uses.

Good luck,
Phill.

Hi Mobicomm, it sounds as though your tests have confirmed that RAS is not the issue. I would like to know how your mobiles are set up under the Tx settings for your channel. There is a GNSS (or GPS) Revert field and if you are using the same channel for Voice / ARS and GPS that should be selected a...

This topic is for help configuring GPS on TransTRBO

http://www.transtrbo.com/files/GPS_Reve ... nsTRBO.pdf

Hi Guys, this is a data / audio cable for TransTRBO. There is a drawing of the PMLN5072 pin-outs under Help on the CPS, just search for "Rear Connector".

Hope it helps,

Phill VK3JPH