Audio Cable for TransTRBO

Posts: 3
Joined: Thu Jan 29, 2015 11:59 pm

Audio Cable for TransTRBO

Postby phillharden » Mon Feb 02, 2015 10:40 pm

Hi Guys, this is a data / audio cable for TransTRBO. There is a drawing of the PMLN5072 pin-outs under Help on the CPS, just search for "Rear Connector".

Hope it helps,

Phill VK3JPH
TTAudioCable.jpg (209.01 KiB) Viewed 3325 times

User avatar
Posts: 11
Joined: Thu Sep 25, 2014 6:32 am
Location: Mazama WA USA

Re: Audio Cable for TransTRBO

Postby no7rf » Mon Sep 05, 2016 12:19 am

For what it's worth, you may need to incorporate ground isolation between the radio and computer. I use 600/1k audio transformers with pots to vary the audio in and out. Laptops tend not to be grounded to the 110VAC lines while the radios are generally grounded. So it may or may not be an issue in your situation.

Mobiles have a COS output. CPS generally allows for setting up the control lines so that PTT and PL/TG Detect work correctly. There is also the ability in CPS for filtered audio. So a number of gotchas in the setup of the radio to accept input from the computer as well as interfacing to a device that can simulate control.

HT's are more limited in their use, especially if you need more than an outboard PTT.

User avatar
Site Admin
Posts: 311
Joined: Mon Jul 21, 2014 5:48 am

Re: Audio Cable for TransTRBO

Postby Administrator » Thu Sep 08, 2016 11:07 am

Hi Mike,

I'm glad to see you got through the snows-storms and the bush-fires - wow - what wild country you live in!

Thanks for the update!

Geriatrics Generate Methane.
Grafitti Clifton Hill 1974
Living proof 2016