Page 1 of 1
ARS User Display empty
Posted: Mon Sep 01, 2014 1:40 am
by krioux
ARS User Display empty
TransTRBO Vn 0.1.0.2
Registry
ARS Lightweight server
ARS User Display is empty, tested with ARS watcher tool and it works. Using IP 192.168.10.1
- Empty list
- ARS.jpg (24.4 KiB) Viewed 7882 times
- ARS Config
- 2014-08-31 21_28_57-Configuration Pages.png (10.76 KiB) Viewed 7882 times
- MT_ARS_WATCHER
- 2014-08-31 21_37_20-.png (100.63 KiB) Viewed 7882 times
Re: ARS User Display empty
Posted: Wed Sep 03, 2014 12:47 am
by Administrator
Hi Karl,
Thanks for that - I'll look into it.
cheers
Will B
Re: ARS User Display empty
Posted: Wed Sep 03, 2014 2:29 am
by Administrator
Hi Karl,
I've just done a quick check and I can't spot any problem.
May I ask if you are running both TransTRBO and MTArsWatcher at the same time.
Because, if you are - then only 1 x of those applications will get the ARS response and the other will miss out.
cheers
Will
Re: ARS User Display empty
Posted: Wed Sep 03, 2014 5:54 pm
by krioux
I never had readings on TransTRBO, running alone or at the sametime than the watcher tool. With the watcher tool, I have been able to detect my base station and my portable, turning them on and off.
It may be a configuration issue on my side, I don't know. Unit Id of my base station is 1004 and my portable is 1014.